earth removal calculator
- Thread starter shuklaji0207
- Start date
Sumit Civil
Well-Known Member
Before excavation, you might have recorded the original ground levels OGL
After excavating trench, you might have recorded the reduce level of trench bottom RL
This will give you the heights / depths of trench.
Measure widht and length.
Width x Length x Depth = Volume.
Without records of level and dimension, you cant calculate.
You can calculate by assuming the dimension, but this will not be acceptable for billing.
After excavating trench, you might have recorded the reduce level of trench bottom RL
This will give you the heights / depths of trench.
Measure widht and length.
Width x Length x Depth = Volume.
Without records of level and dimension, you cant calculate.
You can calculate by assuming the dimension, but this will not be acceptable for billing.
Botyo George
Apprentice
Before excavation.
Determine the OGL reduce level. After excavation to required level you determine the new reduced level.
The difference is the height/depth of excavation . Determine the bulk density of the sample of excavated material and multiple it with the volume of trench.
Density x Lxwxd
Determine the OGL reduce level. After excavation to required level you determine the new reduced level.
The difference is the height/depth of excavation . Determine the bulk density of the sample of excavated material and multiple it with the volume of trench.
Density x Lxwxd
Similar threads
