After deshuttering one column is found twisted and second column width is found 240 to 220 mm (Bulged). Width should be 230 mm as per drawing.
How to repair columns ??
- Thread starter Dhaval Thanki
- Start date
Rohith Rao
Junior Member
Work Procedure for Plumb or Bulge Rectification
Work Procedure for Plumb or Bulge Rectification attachment snapshot NOTE: As far as possible such defects shall be avoided by applying proper checks in formwork and supporting. 1. SCOPE: This method shall be used for the rectification work of out of plumb concrete surfaces and also for...
civil4m.com
Thanks for sharing the procedure.refer this procedureWork Procedure for Plumb or Bulge Rectification
Work Procedure for Plumb or Bulge Rectification attachment snapshot NOTE: As far as possible such defects shall be avoided by applying proper checks in formwork and supporting. 1. SCOPE: This method shall be used for the rectification work of out of plumb concrete surfaces and also for...
Similar threads
