The tolerance in the diameter of bolt holes is about -
(a) + 0.3 and minus 0.2 mm
(b) ± 1.0 mm
(c) ± 0.01 times d.
(d) ± 0.005 times d.
where d = diameter of the hole.
The correct Answer Is
(a) + 0.3 and minus 0.2 mm
(a) + 0.3 and minus 0.2 mm
(b) ± 1.0 mm
(c) ± 0.01 times d.
(d) ± 0.005 times d.
where d = diameter of the hole.
The correct Answer Is
(a) + 0.3 and minus 0.2 mm