What are the three major types of reinforcement used in pre-stressing?
Answer:
Answer:
- Spalling reinforcement Spalling stresses are established behind the loaded area of anchor blocks and this causes breaking away of surface concrete. These stresses are induced by strain incompatibility with Poisson’s effects or by the shape of stress trajectories.
- Equilibrium reinforcement Equilibrium reinforcement is required where there are several anchorages in which pre-stressing loads are applied sequentially.
- Bursting Reinforcement Tensile stresses are induced during pre-stressing operation and the maximum bursting stress occurs where the stress trajectories are concave towards the line of action of the load. Reinforcement is needed to resist these lateral tensile forces.
