How can Calculate total cost of house

To calculate the total cost for construction of house, you need to do following

Make plan for your dream house and get it completely detailed from Architect or you can draw it yourself if you are good with drafting software or doing drawing.

Once you finalize the Aspects of your home, you need to get the design of structure done from Structural designer / consultant or you can do it on your own if know how to do it.

Once you have the Architectural and Structural Plans ready with you, Do finalize the materials which you wish to use inside your home (base on budget you can finalize the materials)

Calculate the Quantities of material required from Architectural drawing dimensions for all finishing works like floor tiling, plaster , dado, painting etc.

Do calculate the reinforcement and concrete quantity required from structural drawing.

Calculating the quantity is easiest it will be either length or length x width or length x width x height.

Once you had all calculated quantities and selected material rates you can proceed further for finalizing contractors to do work for each activity.

Sum up all the cost and you will arrive at a total cost required for construction.

You can adjust the cost in items of luxury by compromising with some aspects, never compromise on structural aspect.
 
Building on Dnyan's steps, I would work it out stage by stage rather than from one overall rate, especially for a small house of about 400 sq ft.

First, fix the plan and the measurements, then take quantities from it: excavation and foundation, plinth, brickwork, lintels, RCC roof/slab, plaster, flooring, doors and windows, then plumbing, electrical work and finishing. For each stage, list the materials separately from labour, because the two move differently. The main cost drivers are usually the local rates for cement, steel, bricks, sand and aggregate, the type of soil and foundation, the roof and finish level, transport to the site, and any water, drainage and electricity connections. Getting two or three local quotations for the same quantities, and keeping a small contingency for rate changes, usually gives a more honest total than a single per-sq-ft figure from another city.

For beneficiary families in Telangana, the Indiramma Illu house is structured in a similar stage-wise way, starting from at least 400 sq ft with an RCC roof, a kitchen and a toilet, fitted to the verified plot and the sanction conditions and checked with the technical officer. This explanation of the indiramma illu house plan sets out how the layout, measurements and stage checks fit together, and why the approved assistance should be kept separate from any extra amount a household arranges itself.