The tolerance in the gap between the built-up plate elements is about -
(a) ± 0.3 mm
(b) ± 1.5 mm
(c) ± 0.01 times w
(d) ± 0.01 times thickness of plate.
where w = width of plate.
The correct Answer Is
(a) ± 0.3 mm
(a) ± 0.3 mm
(b) ± 1.5 mm
(c) ± 0.01 times w
(d) ± 0.01 times thickness of plate.
where w = width of plate.
The correct Answer Is
(a) ± 0.3 mm
