Work Checklist - RCC Column Work

Dnyan Deshmukh

Staff member
RCC Column Work
This checklist helps you in doing checking of RCC columns, Reinforcement and shuttering work checking.
RCC Column work checklist consist of following points;

Reinforcement
  • Column main bars are as per drawing
  • All Links spacing as per drawing
  • All rings provided with 135o bend inside (confinement)
  • Covers provided as per drawing
  • Joggles with correct slope (Max 1in 6) with extra stirrup
  • Master ring provided above top level of concrete (app.1meter)
  • Overlap provided for column bars in central zone
  • Staggering of bars done at overlapping
Shuttering
  • Approved formwork drawings available on site.
  • Size and diagonals of column as per drawing.
  • Plumb, Right angle and alignment checked
  • Gap sealing done at starter level and for all sides
  • Spacing of horizontal runners(chavi) as per drawing.
  • Spacing of vertical Wailers(Patti) as per drawing.
  • Horizontal wailers flush with vertical runners
  • Tie rod provided as per drawing
  • Sufficient cross bracing provided to support the column
  • Shikanja spacing is as per drawing
  • Independent platform erected for casting
  • Top level of concrete marked from inside


Sample checklist is attached in this post.
Checklist is a important record it helps us in order to get work done correctly and it ensure we do not miss any point to check which is important from aspect of Quality of work.
Checklist attached herewith is just a sample provided for your reference, work carried out as per this procedure may have different sets of standards, material specifications, standard operating procedures and terms and conditions for doing that work. This all parameter or some parameter may not match with one you are executing at your Project.
Kindly use it as reference document only to create Checklist. You are free to modify edit, delete add any content in it and use it as per your requirement.
 

Attachments

  • C4M RCC Column Works.docx
    29.7 KB · Views: 713
RCC Column Work
This checklist helps you in doing checking of RCC columns, Reinforcement and shuttering work checking.
Sample checklist is attached in this post.

Checklist is a important record it helps us in order to get work done correctly and it ensure we do not miss any point to check which is important from aspect of Quality of work.
Checklist attached herewith is just a sample provided for your reference, work carried out as per this procedure may have different sets of standards, material specifications, standard operating procedures and terms and conditions for doing that work. This all parameter or some parameter may not match with one you are executing at your Project.
Kindly use it as reference document only to create Checklist. You are free to modify edit, delete add any content in it and use it as per your requirement.
sir I need sample estimation of CIRCULAR COLUMN FOOTING
 
sir I need sample estimation of CIRCULAR COLUMN FOOTING
IT is as simple as it
take out the quantities of the circular column of all items.refer the cost analysis of various items posted in back office forum.do the cost analysis based on the example.multiply the quantity by rate derived.you OBTAINED the cost estimate.please do some home work if you wish to grow in your career