Work Checklist - Slab and Beam Reinforcement Works

Dnyan Deshmukh

Staff member
Slab and Beam Reinforcement Works
This checklist helps you in checking reinforcement of slab and beam.
  • Checklist of Slab and Beam Reinforcement Works consist of following checkpoints in it;
  • Beam reinforcement checked as per Drawing i.e.- numbers and size of main bars, stirrups.
  • Slab Reinforcement checked as per Drawing i.e.- Spacing and size of bars.
  • Approved bar bending schedule available
  • Straightening and alignment of the steel bars satisfactory .
  • L-Bend provided at the discontinuous ends of slab
  • Lap length as per RCC Drawing or minimum 30D
  • Lap position is as per Drawing
  • Rings provided as per Drawing. At column beam junction .
  • Horizontal rings(earthquake rings ) provided in beam near the column .
  • Column reduced from appropriate direction as per drawing.
  • Reduction rings provided at column reduction position
  • Bent up bar position checked as per drawing
  • Chairs sufficient and strong to avoid bending of top reinforcement
  • Min. 3 rings provided above slab level for column reinforcement
  • Dowels kept for adjoining work (IF ANY)
  • Provision made for the elevation treatment if any .
  • Covers provided as specified for the beams and slab
  • All rings provided with 135o bend inside (confinement) .
  • Sleeves provided at appropriate locations.
  • Pin bar of min. 20 dia are provided to avoid touching of main bars
sample checklist is attached herewith.
Checklist is a important record it helps us in order to get work done correctly and it ensure we do not miss any point to check which is important from aspect of Quality of work.
Checklist attached herewith is just a sample provided for your reference, work carried out as per this procedure may have different sets of standards, material specifications, standard operating procedures and terms and conditions for doing that work. This all parameter or some parameter may not match with one you are executing at your Project.
Kindly use it as reference document only to create Checklist. You are free to modify edit, delete add any content in it and use it as per your requirement.
 

Attachments

  • C4M Slab and Beam Reinforcement Works.docx
    30.3 KB · Views: 523
  • Like
Reactions: MANSURI ARFAT