Reinforced Concrete - MCQ

Srinivasan
For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to
Replies
2
Views
1,307
inayat abbas malla
inayat abbas malla
Dnyan Deshmukh
The minimum percentage of shear reinforcement in RCC beams is -
Replies
7
Views
7,785
BPk
B
Dnyan Deshmukh
The maximum compressive strain permitted in un-cracked RCC columns under bending and compression is -
Replies
5
Views
1,635
Saran.sam263
Saran.sam263
Dnyan Deshmukh
In the working stress design, the allowable bending compressive strain in reinforced concrete is -
Replies
2
Views
1,460
Abhi001
A
Dnyan Deshmukh
The approximate allowable average bond stress in reinforced cement concrete with plain bars is -
Replies
2
Views
924
Abhi001
A
Dnyan Deshmukh
The secondary compression failure in RCC beams is caused in -
Replies
3
Views
2,779
hjshah-appmech
hjshah-appmech
Dnyan Deshmukh
The splicing of the reinforcement bars in RCC beams can be done at a section where -
Replies
10
Views
3,501
V R Suresh Simha
V
Srinivasan
A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end
Replies
1
Views
1,197
16bce1156
16bce1156
Srinivasan
The minimum number of main steel bars provided in R.C.C.
Replies
8
Views
2,194
rahuledu
R
Srinivasan
The effective span of a simply supported slab, is
Replies
4
Views
1,703
Bandya
Bandya
Srinivasan
The transverse reinforcements provided at right angles to the main reinforcement
Replies
3
Views
1,586
Er Kishore kumar
Er Kishore kumar
Srinivasan
In the zone of R.C.C. beam where shear stress is less than 5 kg/cm2, nominal reinforcement is provided at a pitch of
Replies
7
Views
1,542
Papa
Papa
Dnyan Deshmukh
The number of tension reinforcement bars in RCC beams that can be spliced at any section should not exceed -
Replies
2
Views
1,218
shashikala
S
Srinivasan
In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted
Replies
2
Views
732
Itsmesandeepyadav
Itsmesandeepyadav
Srinivasan
Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of
Replies
1
Views
1,249
Sumit1511
Sumit1511
Dnyan Deshmukh
The minimum number of torsional longitudinal reinforcement in RCC beams is -
Replies
5
Views
2,628
Esor
Esor
Dnyan Deshmukh
The minimum percentage of tension reinforcement in RCC beams is -
Replies
8
Views
4,237
amrit kshetri
A
Srinivasan
In a combined footing if shear stress exceeds 5 kg/cm2, the nominal stirrups provided are:
Replies
1
Views
2,778
Visal singh
Visal singh
Dnyan Deshmukh
The ratio of the allowable bond stress in deformed bars to that of plain bars is about -
Replies
11
Views
4,965
bikash925
bikash925
Dnyan Deshmukh
The ratio of the effective length of a cantilever column to its height for the possible buckling is -
Replies
13
Views
3,291
Jithen
Jithen
You must log in or register to post here.