Thank you very much.40 Feet=12.19 M is mentioned in any standard?
It is not mentioned in a standard which i refer for rebars i.e. - IS 1786
It is not mentioned because it is not a important parameter like diameter of steel, rinds area on it, weight per meter etc.
It is the parameter like made as per ease, take examples of flat
you may find the various floor to floor heights at various builders and it has other impacts accordingly.
You may specify the length in you purchase order to manufacturer and manufacturer can supply you steel in that length and within parameter specified for it in IS code.
Provided manufacturer has that size / length mould with him, if does not have and not feasible for him your steel rates will increase.
there are lot of things which i cant explain line by line but if we demand something which is not evolved over time with available resources, you need to pay high amount to get that.
if there is no issue in getting length of 12 meters or 12.15 or 12.19 meter, no one really cares about it, what people actually do care for is - its weight per meter, if it goes wrong you looses a lot.
I had never seen a unique size in steel reinforcement bars whenever i measured, but mostly seen the length in between what i written above.