Required mix design of M50 grade concrete

[indrakesh mishra]

Dear Sir,
please share the Design OPC Cement-43 Mix M50 Grade rcc without flyash total quantity of cement eg.
450 cement opc 43 and 110 kg. per cubic meter So how much cement should we apply?

 

[Dnyan Deshmukh]

You can refer below mix design for your reference.

Concrete mix Design for M50 Grade for Mivan Formwork

Concrete mix Design for M50 Grade concrete with PPC Cement for Mivan Formwork is as follows; PPC Cement 53 Grade – 560 Kg Water Cement ratio (w/c) – 0.30 Free Water – 168 liters 20mm Metal / Aggregates – 467 Kg 10mm Metal / Aggregates – 471 Kg Crush Sand – 883 Kg Admixture Dosage – 1 %...

civil4m.com

Your question is not clear, so cant help you much on it but reading the mix design guidelines will help you.

Become Concrete Master - Concrete Mix Designing

Concrete is a material which is a basic for any project. I will be helping you out by sharing my experience with all of you (You too can help me in learning new tech's in this field by sharing your experience through doing post on forum). After reading all posts you will be in position to say...

civil4m.com